The rescue system and change de root password

Tu Cloud Server Rescue System

The TCS Rescue System is a Linux live environment that allows you to have administrative access to your server. The environment starts from the network (PXE boot) and runs in the memory of the server. This makes it possible to carry out repairs to the installed system, to check file systems or to install a new operating system.

Alternatively or additionally, you can use a remote console via our console customer panel.

Starting the Rescue System

Activating the Rescue System

To start a server in the Rescue System, it needs to be activated in the customer console. Under Product/Services select your server and down the page.

Under "Summary Functions" open the tab "Rescue". Here the desired variant can be activated.

The password that was given to you when you activated the Rescue System can now be used to login as "root" via SSH.

Restarting the Server

To load the Rescue System, the server must be restarted.

If you no longer have access to the server, you can use the reset function in the customer console. You will find this under the "Reset" tab of the desired server.

Please note that the activation of the Rescue System automatically becomes inactive after one hour. If the server is restarted later, the system will boot from the internal drive(s).

Mounting the Drive(s) in the Rescue System

Without Software Raid

You can display the detected drives.

ls /dev/[hsv]d[a-z]*[0-9]*
 
# e.g. /dev/sda /dev/sda1 /dev/sda2 /dev/sda3

You can then mount the desired drive/partition.

mount /dev/sda3 /mnt

With Software Raid

You can display the detected MD devices.

ls /dev/md*
 
# e.g. /dev/md0 /dev/md1 /dev/md2

You can then mount the desired MD device.

mount /dev/md2 /mnt

Mounting LVM Volumes

You can display the LVM Volumes.

ls /dev/mapper/*
 
# e.g. /dev/mapper/vg0-home /dev/mapper/vg0-root /dev/mapper/vg0-swap

You can then mount the desired LVM volumes.

mount /dev/mapper/vg0-root /mnt

Resetting the Root Password

To reset the root password of the server, you must first mount the drives as explained in previous point.

Then use chroot to switch into the mounted system.

chroot-prepare /mnt
 
chroot /mnt

You can now change the password directly by using passwd.

passwd

Installation of an Operating System

Tu Cloud Server offers a a comfortable menu-based script called installimage for installing an operating system. Information can be found in the installimage page.

  • 0 Kunder som kunne bruge dette svar
Hjalp dette svar dig?

Relaterede artikler

VMware vSphere Hypervisor

Hardware VMware vSphere Hypervisor 5.x and 6.0 (ESXi) use a filesystem called vmfs5 (formerly...

Instructions for install the new subnet or the new IP address

All dedicated and virtual servers come with an IPv4 address, as well as a /64 IPv6 subnet....

Reboot or Restart your dedicated server or VPS server

You can perform this action by yourself following these steps: 1- Login in your customer console...

Change your rDNS Entry

Change your rDNS entry You can change your rDNS entry for yourself following these steps: 1-...

Add and Delete Users on Linux

Setup This tutorial requires access to the root user or a user with sudo privileges. You should...

Powered by WHMCompleteSolution